Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLAND ROVER2009LR3 (LA) V8-4.4LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSHEATING AND AIR CONDITIONINGSYSTEM SPECIFICATIONSTORQUE SPECIFICATIONS
2009 Land Rover LR3 (LA) V8-4.4L
Torque Specifications
2009 Land Rover LR3 (LA) V8-4.4LSECTION Torque Specifications
Torque Specifications
4.0 Liter
Compressor Mounting Bolts 25 Nm (18 ft. lbs.)
Receiver/Drier Mounting Bolts 10 Nm (7 ft. lbs.)
Refrigerant Line Bolts 10 Nm (7 ft. lbs.)
Condenser Core Bolts - Not 2.7 litre 10 Nm (7 ft. lbs.)
Radiator Bolts 25 Nm (18 ft. lbs.)
A/C Pipe Bolts 25 Nm (18 ft. lbs.)
Coolant Expansion Tank Bolts 10 Nm (7 ft. lbs.)
Heater Housing To Bulkhead Torx Bolts 6 Nm (4 ft. lbs.)
Adaptor Panel Nuts 6 Nm (4 ft. lbs.)
Air Conditioning Lines To Bulkhead Bolt 6 Nm (4 ft. lbs.)
Air Conditioning Lines To Body Nut 6 Nm (4 ft. lbs.)
Instrument Panel Torx Bolts 25 Nm (18 ft. lbs.)
Instrument Panel Carrier To Bulkhead Torx Bolt 25 Nm (18 ft. lbs.)
Steering Column Intermediate Shaft Nut* 22 Nm (16 ft. lbs.)
Ground Cables To Passenger Side Lower A-Pillar Nuts 10 Nm (7 ft. lbs.)
Ground Cables To Driver Side Lower A-Pillar Nuts 10 Nm (7 ft. lbs.)
Pressure Transducer 10 Nm (7 ft. lbs.)
4.4 Liter
Compressor Mounting Bolts 25 Nm (18 ft. lbs.)
Receiver/Drier Mounting Bolts 10 Nm (7 ft. lbs.)
Refrigerant Line Bolts 10 Nm (7 ft. lbs.)
Condenser Core Bolts - Not 2.7 litre 10 Nm (7 ft. lbs.)
Radiator Bolts 25 Nm (18 ft. lbs.)
A/C Pipe Bolts 25 Nm (18 ft. lbs.)
Coolant Expansion Tank Bolts 10 Nm (7 ft. lbs.)
Heater Housing To Bulkhead Torx Bolts 6 Nm (4 ft. lbs.)
Adaptor Panel Nuts 6 Nm (4 ft. lbs.)
Air Conditioning Lines To Bulkhead Bolt 6 Nm (4 ft. lbs.)
Air Conditioning Lines To Body Nut 6 Nm (4 ft. lbs.)
Instrument Panel Torx Bolts 25 Nm (18 ft. lbs.)
Instrument Panel Carrier To Bulkhead Torx Bolt 25 Nm (18 ft. lbs.)
Steering Column Intermediate Shaft Nut* 22 Nm (16 ft. lbs.)
Ground Cables To Passenger Side Lower A-Pillar Nuts 10 Nm (7 ft. lbs.)
Ground Cables To Driver Side Lower A-Pillar Nuts 10 Nm (7 ft. lbs.)
Pressure Transducer 10 Nm (7 ft. lbs.)
Auxiliary Climate Control
TVX Assembly Bolts 10 Nm (7 ft. lbs.)
Auxiliary Climate Control Assembly Bolts 10 Nm (7 ft. lbs.)
Auxiliary Climate Control Sealing Plate Bolts 10 Nm (7 ft. lbs.)
A/C Pipe Bolts 10 Nm (7 ft. lbs.)
TVX Assembly Bolts 10 Nm (7 ft. lbs.)
*New Nuts Must Be Fitted
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.