Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Land Rover LR2 (LF) L6-3.2LFACTORY OEM SERVICE PROCEDURE
Steering Geometry (Wheel Alignment)
Steering Geometry
Front
Camber -0.50°+/-0.75° (-0.30'+/-0.45')
Total/Balance 0.0°+/-0.75° (0'+/-0.45')
Castor 3.25°+/-0.75° (3°15'+/-0.45')
Total/Balance 0.0°+/-0.75° (0'+/-0.45')
Total Toe 0.20°+/-0.20° (0.12'+/-0.12')
Rear
Camber 1.95°+/-0.75° (-1°57'+/-0.45')
Toe 0.17°+/-0.14° (0.10'+/-0.8')
Total 0.33°+/-0.20° (0.10'+/-0.8')
Thrust Angle 0.0°+/-0.14° (0.0'+/-0.8')
Front
Camber -0.50°+/-0.75° (-0.30'+/-0.45')
Total/Balance 0.0°+/-0.75° (0'+/-0.45')
Castor 3.25°+/-0.75° (3°15'+/-0.45')
Total/Balance 0.0°+/-0.75° (0'+/-0.45')
Total Toe 0.20°+/-0.20° (0.12'+/-0.12')
Rear
Camber 1.95°+/-0.75° (-1°57'+/-0.45')
Toe 0.17°+/-0.14° (0.10'+/-0.8')
Total 0.33°+/-0.20° (0.10'+/-0.8')
Thrust Angle 0.0°+/-0.14° (0.0'+/-0.8')
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
