Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Land Rover Freelander (LN) V6-2.5LFACTORY OEM SERVICE PROCEDURE
Crankshaft Position Sensor: Service and Repair
Sensor - Crankshaft Position (CKP)
Service repair no - 18.30.12
Remove
1. Disconnect battery earth lead.
2. Remove engine acoustic cover.
3. Disconnect CKP sensor multiplug from engine harness.
4. Remove underbelly panel.
5. Remove bolt securing CKP sensor to gearbox housing and remove sensor.
Refit
1. Clean CKP sensor and mating face.
2. Position CKP sensor, fit and tighten bolt to 9 Nm (6.5 ft. lbs.).
3. Fit underbelly panel.
4. Connect CKP sensor multiplug to engine harness.
5. Fit engine acoustic cover.
6. Connect battery earth lead.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.