2004 Land Rover Freelander (LN) V6-2.5LFACTORY OEM SERVICE PROCEDURE

Body Control Module: Service and Repair


Central Control Unit

Service Repair No - 86.55.75


Remove
1. Disconnect battery earth lead.

Factory service manual diagram




2. Open drivers glove box lid and remove fuse box cover.

Factory service manual diagram




3. Remove bolt securing fuse box mounting plate to steering column bracket.
4. Remove 2 bolts securing mounting plate to body.
5. Remove 2 bolts securing fuse box to mounting plate.
6. Disconnect 3 multiplugs from CCU in rear of fuse box.

Factory service manual diagram




7. Manoeuvre fuse box to gain access to CCU.
8. Release retaining clips and remove CCU.

Refit
1. Position CCU and secure in clips.
2. Align fuse box to mounting plate.
3. Connect multiplugs to CCU.
4. Fit bolts securing fuse box to mounting bracket and tighten to 8 Nm (6 ft. lbs.).
5. Position mounting plate and tighten bolts to 8 Nm (6 ft. lbs.).
6. Fit fuse box cover.
7. Close glove box.
8. Connect battery earth lead.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.