2004 Land Rover Freelander (LN) V6-2.5LFACTORY OEM SERVICE PROCEDURE

Rear Wheel Alignment



Rear Wheel Alignment - Check and Adjust

Service Order No - 57.65.06

Check
1. Ensure tire pressures are correct and vehicle is at curbside weight.
2. Roll vehicle backwards and forwards to relieve stresses in steering and suspension.
3. Ensure that wheel alignment equipment is properly calibrated.
4. Check front wheel alignment is within tolerance.
5. Check rear wheel alignment is within tolerance.

Adjust

Factory service manual diagram




1. Hold turnbuckle on adjustable link and loosen both lock nuts.
2. Rotate turnbuckle to obtain correct alignment.
3. Hold turnbuckle and tighten lock nuts to 90 Nm (66 ft. lbs.).
4. Roll vehicle backwards and forwards to relieve stress in suspension.
5. Repeat check and adjust procedure on other side of vehicle.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.