Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

Torque Wrench Settings

TORQUE DESCRIPTION	METRIC	IMPERIAL
Anti-roll bar saddle clamp to subframe bolts	23 Nm	17 lbf.ft
Anti-roll bar link to damper nut	55 Nm	41 Ibf.ft
Anti-roll bar to link nut	55 Nm	41 Ibf.ft
Damper assembly to body top mounting nuts Tighten with weight of vehicle on suspension	45 Nm	33 Ibf ft
Damper to hub nuts and bolts Tighten with weight of vehicle on suspension	205 Nm	151 Ibf.ft
Damper shaft locking nut	57 Nm	42 Ibf ft
Engine lower steady to support beam bolt	100 Nm	74 Ibf ft
Engine tie-bar to sump bolts	100 Nm	74 Ibf ft
Front subframe to body front bolts	190 Nm	140 Ibf.ft
Hub drive shaft nut Use NEW nuts	400 Nm	295 Ibf ft
Hub assembly to lower swivel joint nut	65 Nm	48 Ibf ft
Lower arm front bush to subframe bolt Tighten with weight of vehicle on suspension	190 Nm	140 Ibf ft
Lower arm rear bush housing bolts to body Tighten with weight of vehicle on suspension	105 Nm	77 Ibf ft
Lower arm to rear bush housing nut Tighten with weight of vehicle on suspension	140 Nm	103 Ibf ft
Road wheel nuts Tighten in diagonal sequence	115 Nm	85 Ibf ft
Support beam to body bolts	190 Nm	140 Ibf.ft

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Front Suspension and Subframe