2003 Land Rover Freelander (LN) V6-2.5LFACTORY OEM SERVICE PROCEDURE

Access Cover: Service and Repair




12.30.50 Cover - Engine Acoustic


Remove

Factory service manual diagram




1. Loosen clip and disconnect fresh air intake hose from acoustic cover.
2. NON NAS: Loosen clip and release air intake and air bypass hose from throttle body
3. NAS: Loosen clip and disconnect air intake hose from air flow meter (MAF) sensor.
4. Release 2 turnbuckles securing acoustic cover to LH camshaft cover.
5. Release retaining strap and remove acoustic cover.

Refit
1. Fit and secure engine acoustic cover.
2. Connect air intake and air bypass hoses, secure clip.
3. Connect fresh air intake hose to acoustic cover and tighten clip screw.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.