Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Gateway Module: Notes
A gateway module is located behind the touch screen display. The gateway module is the link component between the vehicle bus systems and the audio system MOST ring. When the vehicle is unlocked, the gateway module receives a system 'wake-up' message on the CAN bus. This message is then passed on the CAN bus from the gateway module to the integrated head unit which then 'wakes-up' the MOST ring components by energizing the infotainment relay.
The gateway module is connected by a dedicated CAN bus directly to the diagnostic socket. This allows the infotainment system to interrogated for fault codes and diagnostics using T4.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
