2002 Land Rover Freelander SFACTORY OEM SERVICE PROCEDURE

86.55.75 Central Control Unit (CCU): Refit

  1. Position CCU and secure in clips.
  2. Align fuse box to mounting plate.
  3. Connect multiplugs to CCU.
  4. Fit bolts securing fuse box to mounting bracket and tighten to 8 Nm (6 lbf.ft).
  5. Position mounting plate and tighten bolts to 8 Nm (6 lbf.ft).
  6. Fit fuse box cover.
  7. Close glove box.
  8. Connect battery earth lead.
  9. Using T4, configure a new CCU.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.