Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Land Rover Freelander (LN) V6-2.5LFACTORY OEM SERVICE PROCEDURE
Circuit Reference Numbers
CIRCUIT REFERENCE NUMBERS
CONNECTOR APPLICABILITY
General
The following table lists the circuit reference numbers against a description of the model or feature to which they apply.
This information should be used in conjunction with the connector pin-out tables on the following pages to determine the wire configuration of the vehicle being worked on.
Cct Model or feature
1 All
2 3 Door
3 5 Door
4 LHD
5 RHD
6 Td4
7 K1.8
8 KV6
9 Low line audio system
10 Mid-line audio system
11 Mid-line audio system with amplifier
12 High line audio system
13 CD autochanger
14 Audio system power amplifier
15 Folding door mirrors
16 Automatic gearbox
17 Manual gearbox
18 North American Specification
19 Canadian Specification
20 Australian Specification
21 K1.8 and KV6
22 KV6 (LHD)
23 KV6 (RHD)
24 Cruise control (LHD)
25 Cruise control (RHD)
26 Cruise control - NAS and Td4
27 K1.8 with A/C, Td4, and KV6
28 K1.8 and KV6 (LHD)
29 K1.8 and KV6 (RHD)
30 Td4 and NAS KV6
31 Td4 (LHD)
32 Td4 (RHD)
33 5 door (LHD)
34 5 door (RHD)
35 3 door (LHD)
36 3 door (RHD)
37 Folding door mirrors (LHD)
38 Folding door mirrors (RHD)
39 Automatic transmission (LHD)
40 Automatic transmission (RH D)
41 Heated front seats
42 K1.8 with A/C
43 Instrument illumination dimmer
44 No instrument illumination dimmer
45 Fuel burning heater
46 Td4 and KV6
47 Sunroof
48 Headlamp levelling
49 K1.8, Td4, and KV6
50 Td4 with cruise control
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
