2000 Land Rover Range Rover BaseFACTORY OEM SERVICE PROCEDURE

Service Intervals & Specifications

REPLACEMENT INTERVALS

Component Interval (Miles)
Air Filter (1) 30,000
Brake Fluid 30,000
Coolant (2) 75,000
Fuel Filter (3) 90,000
Engine Oil & Oil Filter (1) 7500
Front & Rear Differential Oil (4) 30,000
Oxygen Sensors (5) 82,500
Pollen Filters (6) 15,000
Serpentine Accessories Drive Belt Replacement (7) 75,000
Spark Plugs (1) 60,000
Transfer Case Oil 30,000
Transmission Filter (A/T) (8) 30,000
Transmission Fluid
A/T 30,000
M/T 30,000
(1) Required emissions maintenance. On all models, when replacing air cleaner, ensure air cleaner housing drain holes are clear.
(2) Change engine coolant every 30,000 miles on Discovery Series I.
(3) Change fuel filter every 60,000 miles on Discovery Series I.
(4) On Discovery Series II when using synthetic gear oil, change front and rear differential oil every 90,000 miles. If using conventional gear oil, change every 30,000 miles. On all models, drain and refill using measured quantity of specified gear oil. Correct fill level may be below the level of the filler plug.
(5) Required emissions maintenance on Discovery Series I. Reset Emission Maintenance Reminder light and change oxygen sensors at 82,500 miles.
(6) Range Rover.
(7) On Discovery Series II, equipped with Active Cornering Enhancement (ACE), replace serpentine drive belt at 45,000 miles.
(8) Replace transmission oil filter during first fluid change only. Subsequent filter replacement is not required.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.