2000 Land Rover DiscoveryFACTORY OEM SERVICE PROCEDURE

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Engine-To-Torque Converter Bolts (1) 37 (50)
Extension Housing Bolts 18 (25)
Gearbox Bell Housing (Intermediate Plate & Converter Housing-To-Gearbox Casing) Bolts 34 (46)
Intermediate Plate Allen Plugs (M14) 30 (40)
Intermediate Plate Allen Plugs (M20) 37 (50)
Oil Cooler Adaptors 31 (42)
Selector Lever-To-Selector Shaft Nut 19 (26)
INCH Lbs. (N.m)Β 
Closing Plate-To-Gearbox Housing Bolt 64 (7)
Fluid Pump-To-Intermediate Plate Bolts 89 (10)
Lock-Up Solenoid Valve Assembly-To-Valve Body Torx Screws 72 (8)
Lock-Up Solenoid Valve, Retaining Fork Torx Screw 72 (8)
Oil Filter Torx Screws 72 (8)
Oil Pick-Up Tube Torx Screw 72 (8)
Oil Sump-To-Gearbox Housing Bolts 72 (8)
Parking Pawl Guide Torx Screw 89 (10)
Pressure Regulator-To-Valve Body Assembly 72 (8)
Speed Sensor Bracket Screws
Β 
72 (8)
Starter Inhibitor Switch Bolts 89 (10)
(1) Apply sealant, Part No. STC 50553 to threads.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.