1995 Land Rover Discovery AutomaticFACTORY OEM SERVICE PROCEDURE

Engine Controls - Service & Adjustment Specifications: Capacities

FLUID CAPACITIES

Application Quantity
Auto. Transmission (Dexron-IID ATF) 9.6 Qts. (9.1 L)
Crankcase (Includes Filter) (1) 7 Qts. (6.6 L)
Cooling System (Includes Heater)
(50/50 Mixture Of Ethylene Glycol Antifreeze & Water)
12 Qts. (11.4 L)
Differential (2)(3) 3.6 Pts. (3.4 L)
Man. Transmission (Dexron-IID ATF) 5.7 Pts. (5.4 L)
Transfer Case (3) 4.9 Pts. (4.6 L)
Power Steering (4) 7.2 Pts. (6.8 L)
Front Axle Swivel Pin Housing (5) 0.75 Pts. (0.71 L)
(1) API Service Level SGMSH SAE 10W-40, 10W-50
(2) Both front and rear.
(3) API GL4 Or GL5 MIL-L-2105 Or ML-l-2105B, 90 EP, 80W EP
(4) Dexron-IID ATF
(5) API GL5, MIL-L-2105 Or MIL-L-2105B, C Or D
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.