Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Land Rover Range Rover CountyFACTORY OEM SERVICE PROCEDURE
Memory Modules
- Description & Operation
- Component Locations
- On-Vehicle Service
- Trouble Shooting
- System Tests
- Self Test
- Test A: Manual & Memory Seat Functions Inoperative (Fuses Okay) Or System Does Not Retain Memory Seat Or Mirror Positions
- Test B: Memory Seat System Does Not Operate When Ignition Is In Position II & Handbrake Is Applied (Manual Transmission)
- Test C: Memory Seat System Does Not Operate When Ignition Is In Position II & Handbrake Is Applied (Automatic Transmission)
- Test D: Manual & Memory Seat Functions Inoperative (Fuses Okay) Or System Does Not Retain Memory Seat Or Mirror Positions
- Test E: System Will Not Perform Self Test Or Memory Seat & Mirror Functions Do Not Operate, But Seat Does Operate In Some Modes Manually
- Test F: All Seat Motors Operate During Self Test, But Not When Driver's Seat Control Switch Is Used
- Test G: All Mirror Motors Operate During Self Test, But Not When Mirror Adjustment Switch Is Used
- Test H: Mirror Motor Moves During Self Test, Then Stops (Left)
- Test I: Mirror Motor Moves During Self Test, Then Stops (Right)
- Test J: Seat Motor Does Not Move At All During Self Test
- Test K: Mirror Motor Does Not Move At All During Self Test (Left)
- Test L: Mirror Motor Does Not Move At All During Self Test (Right)
- Removal & Installation
- Wiring Diagrams
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.