NOTE: If a push-button is touched accidentally when the ignition is off, a warning tone will sound. Turn the ignition on and the tone will stop.

Obtain 5-digit security code from vehicle owner or manufacturer. Enter security code number using radio (Z111) push-button selectors.
If correct security code is not entered in 3 successive attempts, the radio (Z111) will not accept another entry until the radio has been left on for 1 hour with the ignition on.
When entering the code, be sure to complete the sequence numbering of that 5-digit code, even if you made a mistake. For example; if the correct code number sequence is '43215' and you mistakenly enter '42' instead of '43', continue the code number sequence '215' to complete that entry. A "beep" will sound, "CODE" will still be displayed and the radio will not operate. Re-enter the correct code '43215' and the radio will operate.
If an audible "beep" is heard while entering the code, STOP immediately. Begin entering the code again, starting with the first number of the 5-digit security code.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Security Code