Integrated Central Control Unit DTCS

2024 Kia Forte GT LineSECTION Integrated Central Control Unit DTCS
INTEGRATED CENTRAL CONTROL UNIT DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC Description
B1101-00 Battery Voltage High
B1102-00 Battery Voltage Low
B1603-00 B-CAN Bus Off Error
B1621-00 ECU-Failure
B1644-00 CAN Time-Out ACU
B164C-00 CAN Time-Out IBU
B164D-00 CAN Time-Out WPC
B1699-00 CAN Time-Out AV/AVN
B2352-00 Dedicated DRL LH Short To Ground
B2353-00 Dedicated DRL RH Short To Ground
B2510-00 Head Lamp High RH SCG
B2511-00 Head Lamp High LH SCG
B2512-00 Head Lamp Low RH SCG
B2513-00 Head Lamp Low LH SCG
B2517-00 Internal Tail Lamp Circuit Short To Ground
B251B-00 Bi-Function Head Lamp RH Short To Ground
B251C-00 Bi-Function Head Lamp LH Short To Ground
B251D-00 Stop Lamp Right Short To Ground
B251E-00 Stop Lamp Left Short To Ground
B251F-00 High Mounted Stop Lamp Short To Ground
B2522-00 Turn Signal LH Front Short To Ground
B2523-00 Turn Signal LH Rear Short To Ground
B2524-00 Turn Signal RH Front Short To Ground
B2525-00 Turn Signal RH Rear Short To Ground
B2559-00 Front Fog Lamp Right Circuit Short To Ground
B2563-00 Front Fog Lamp Left Circuit Short To Ground
B258A-00 External Tail Lamp Front Right Circuit Short To Ground
B258B-00 External Tail Lamp Front Left Circuit Short To Ground
B258C-00 External Tail Lamp Rear Right Circuit Short To Ground
B258D-00 External Tail Lamp Rear Left Circuit Short To Ground
B2610-00 Backup Lamp Short To Ground
B2800-00 M-CAN Bus Off Error
B2801-00 M-CAN Single Line Error
B2804-00 CAN Time-Out DATC
B2810-00 CAN Time-Out PGS/AVM/FRMS/RVM
B2817-00 I-CAN Bus Off Error
C160E-00 P-CAN Bus Off Error
C160F-00 D-CAN Bus Off Error
C1611-00 CAN Time-Out EMS
C1612-00 CAN Time-Out TCU
C1616-00 C-CAN Bus Off Error
C1625-00 CAN Time-Out ABS/ESP (ABS/ESC)
C1628-00 CAN Time-Out Cluster
C1667-00 CAN Time-Out ACC/SCC
C166A-00 CAN Time-Out LDWS/LKAS/MFC
C1687-00 CAN Time-Out VSM2 (MDPS)
C1818-00 CAN Time-Out LCA/BSD/BCW
C1867-00 CAN Time-Out FCA/AEB
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.