Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2024 Kia EV9 LightFACTORY OEM SERVICE PROCEDURE
Power-Net Domain Control DTCS
POWER-NET DOMAIN CONTROL DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| B1000-51 | EOL Not Programmed |
| B1101-00 | Battery Voltage High |
| B1102-00 | Battery Voltage Low |
| B1603-00 | CAN Bus OFF (B-CAN) |
| B1621-00 | ECU hardware Error |
| B1636-00 | LIN Error |
| B2352-00 | Dedicated DRL LH SCG |
| B2353-00 | Dedicated DRL RH SCG |
| B2473-00 | Haptic Warning System Open Circuit |
| B2474-00 | Haptic Warning System Short to Ground |
| B2510-00 | Head Lamp High RH SCG |
| B2511-00 | Head Lamp High LH SCG |
| B2512-00 | Head Lamp Low RH SCG |
| B2513-00 | Head Lamp Low LH SCG |
| B2517-00 | Internal Tail Lamp Circuit Short to Ground |
| B251A-00 | Rear Fog Lamp Circuit Short to Ground |
| B251B-00 | Bi-Function Head Lamp RH Circuit Short to Ground |
| B251C-00 | Bi-Function Head Lamp LH Circuit Short to Ground |
| B251D-00 | Stop Lamp Right Circuit Short to Ground |
| B251E-00 | Stop Lamp Left Circuit Short to Ground |
| B251F-00 | High Mounted Stop Lamp Short to Ground |
| B2522-00 | Turn Signal LH Front Short to Ground |
| B2523-00 | Turn Signal LH Rear Short to Ground |
| B2524-00 | Turn Signal RH Front Short to Ground |
| B2525-00 | Turn Signal RH Rear Short to Ground |
| B258A-00 | External Tail Lamp Front Right Circuit Short to Ground |
| B258B-00 | External Tail Lamp Front Left Circuit Short to Ground |
| B258C-00 | External Tail Lamp Rear Right Circuit Short to Ground |
| B258D-00 | External Tail Lamp Rear Left Circuit Short to Ground |
| B2602-00 | Low Head Lamp LH Open Circuit |
| B2603-00 | Low Head Lamp RH Open Circuit |
| B2604-00 | Bi-Function Head Lamp LH Open Circuit |
| B2605-00 | Bi-Function Head Lamp RH Open Circuit |
| B2608-00 | Turn Signal Lamp Front LH Open Circuit |
| B2609-00 | Turn Signal Lamp Front RH Open Circuit |
| B260A-00 | Turn Signal Lamp Rear LH Open Circuit |
| B260B-00 | Turn Signal Lamp Rear RH Open Circuit |
| B2610-00 | Backup Lamp Short Circuit to Ground |
| B2707-00 | Heated Washer Nozzle Circuit Short to Ground |
| U04B1-00 | Invalid Data Received From Battery Monitor Module |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.