Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2023 Kia Soul EXFACTORY OEM SERVICE PROCEDURE
Front View Camera System DTCS
FRONT VIEW CAMERA SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| C1101-17 | Battery Voltage High |
| C1102-16 | Battery Voltage Low |
| C1532-11 | Lane Safety Button Failure |
| C1532-15 | Lane Safety Button Failure |
| C1532-23 | Lane Safety Button Failure |
| C1604-49 | ECU Hardware Error |
| C1606-49 | ECU Software Error |
| C160A-87 | Local CAN Bus Off |
| C160C-87 | Local CAN Time-Out |
| C1611-87 | CAN Time-Out EMS |
| C1612-87 | CAN Time-Out TCU |
| C1613-86 | CAN Signal Error EMS |
| C1623-85 | CAN Time-Out Steering Angle Sensor |
| C1623-87 | CAN Time-Out Steering Angle Sensor |
| C1625-85 | CAN Time-Out ABS/ESP |
| C1625-87 | CAN Time-Out ABS/ESP |
| C1628-87 | CAN Time-Out Cluster |
| C1642-86 | CAN Message Failure - Brake |
| C1646-86 | CAN Message Failure - TCU |
| C1656-86 | CAN Signal Error - Cluster |
| C1669-87 | CAN Time-Out ACU |
| C167A-87 | CAN Time-Out NAVI |
| C1687-85 | CAN Time-Out VSM2 (MDPS) |
| C1687-87 | CAN Time-Out VSM2 (MDPS) |
| C1688-86 | VSM2 (MDPS) Signal Error |
| C16B9-02 | FCA, SCC Communication Error |
| C1702-46 | Variant Coding Error |
| C1742-81 | Variant Error - ESC (Check ESC) |
| C1812-87 | CAN Time-Out Gateway |
| C1831-86 | CAN Signal Error - Navigation |
| C183D-86 | CAN Message Failure - SWRC |
| C1842-86 | YRS_Yaw Rate Or YRS_Lat Accel Or YRS Long Accel Not Valid |
| C1863-87 | CAN Time-Out NAVI For HDA |
| C2239-86 | MDPS Steering Control Failure For LKA |
| C2253-87 | CAN Time-Out IBU |
| C2721-46 | System Calibration Required |
| C2722-46 | System Out Of Calibration |
| C28AC-87 | CAN Time-Out SWRC |
| C28B8-81 | ESP Reversible Error |
| C28B9-81 | ESC Reversible Error For FCA |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
