2023 Kia Niro EXFACTORY OEM SERVICE PROCEDURE

1st Method

  1. Start the engine and keep the engine running at idle for 2 minutes.
  2. Place the shift lever in 'N' and press the accelerator to maintain engine rpm at 4, 500.

    Warm up the engine until engine coolant temperature reaches at 80Β°C (176Β°F).

  3. Keep the engine running at 2, 500 - 3, 000 rpm in the N position for 15 minutes.
G15766906Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.