2023 Kia Forte GT LineFACTORY OEM SERVICE PROCEDURE

Neutralization Status Check

  1. Connect the cable of KDS to the data link connector in driver side crash pad lower panel.
  2. After IG ON, select the "Neutralization mode".
    G14556993Courtesy of KIA MOTORS AMERICA, INC.
    G14556994Courtesy of KIA MOTORS AMERICA, INC.
    G14556995Courtesy of KIA MOTORS AMERICA, INC.
    G14556996Courtesy of KIA MOTORS AMERICA, INC.
    G14556997Courtesy of KIA MOTORS AMERICA, INC.
    G14556998Courtesy of KIA MOTORS AMERICA, INC.
    G14556999Courtesy of KIA MOTORS AMERICA, INC.
    G14557000Courtesy of KIA MOTORS AMERICA, INC.
    G14557001Courtesy of KIA MOTORS AMERICA, INC.
    G14557002Courtesy of KIA MOTORS AMERICA, INC.
    G14557003Courtesy of KIA MOTORS AMERICA, INC.
    G14557004Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.