Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Kia K5 GT-Line, FWDFACTORY OEM SERVICE PROCEDURE
Repair Procedures: Inspection
WARNING: This page is about a different car, the 2024 Kia K5. However, it is still accessible from the selected car via links, so may be relevant.
- Check for resistance between terminals in each switch position.
[Audio + Bluetooth + Voice]
| Switch | Connector terminal | Resistance (±3%) |
|---|---|---|
| SEEK Up | 1-6 | 430 Ω |
| SEEK Down | 1.11 kΩ | |
| MODE | 2.11 kΩ | |
| MUTE | 3.11 kΩ | |
| Volume (+) | 4.61 kΩ | |
| Volume (-) | 6.81 kΩ | |
| Voice | 10.71 kΩ | |
| END | 18.91 kΩ | |
| SEND | 40.91 kΩ |
[Trip + SCC + LFA]
| Switch | Connector terminal | Resistance (±3%) |
|---|---|---|
| Pause | 2-6 | 610 Ω |
| Speed (Down) | 910 Ω | |
| Speed (Up) | 1.38 kΩ | |
| Cruise ON/OFF | 2.13 kΩ | |
| SCC | 7.93 kΩ | |
| Trip group | 1-6 | 610 Ω |
| Trip (Up) | 910 Ω | |
| Trip (Down) | 1.38 kΩ | |
| Trip (OK) | 2.13 kΩ | |
| LFA | 7.93 kΩ |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.