2021 Kia Telluride EX, FWDFACTORY OEM SERVICE PROCEDURE

Repair Procedures: Inspection

  1. Remove the console upper cover switch.

    (Refer to Advanced Driver Assistance System - "SURROUND VIEW MONITOR (SVM) SWITCH ")

  2. After pushing the ISG OFF switch, check for continuity between the ground (pin 24) and signal (pin 8).
    G13310123Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.