2021 Kia Telluride EX, FWDFACTORY OEM SERVICE PROCEDURE

Smart Key Code Saving

  1. Connect the VCI II in driver side crash pad lower panel, turn the power on KDS.
  2. Select the vehicle model and then do "Smart key code saving".
    G13312511Courtesy of KIA MOTORS AMERICA, INC.
    G13312512Courtesy of KIA MOTORS AMERICA, INC.
  3. After selecting "Smart Key Code Saving" menu, push "OK" button, then the screen will be shown as below.
    G13312513Courtesy of KIA MOTORS AMERICA, INC.
  4. After teaching new smart key, push "OK" button.
  5. Input the "Pin code" for first key teaching.
    G13312514Courtesy of KIA MOTORS AMERICA, INC.
    G13312515Courtesy of KIA MOTORS AMERICA, INC.
    G13312516Courtesy of KIA MOTORS AMERICA, INC.
  6. Confirm the message "First key teaching completed".
    G13312517Courtesy of KIA MOTORS AMERICA, INC.
  7. Press the SSB with smart key within 5 sec after pressing "OK".
    G13312518Courtesy of KIA MOTORS AMERICA, INC.
  8. Confirm the message "Second key teaching completed".
    G13312519Courtesy of KIA MOTORS AMERICA, INC.
    G13312520Courtesy of KIA MOTORS AMERICA, INC.
  9. Then the screen will be shown as below when key teaching process is completed.
G13312521Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.