Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Kia Stinger GT-Line, AWDFACTORY OEM SERVICE PROCEDURE
Multi Function Camera DTCS
MULTI FUNCTION CAMERA DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC C1101 | 17: Battery Voltage High |
| DTC C1102 | 16: Battery Voltage Low |
| DTC C1532 | 11: LKAS switch failure |
| DTC C1532 | 15: LKAS switch failure |
| DTC C1532 | 23: LKAS switch failure |
| DTC C1604 | 49: ECU Hardware Error |
| DTC C1606 | 49: ECU Software Error |
| DTC C160A | 87: Local CAN Bus Off |
| DTC C160C | 87: Local CAN Time-out |
| DTC C1613 | 86: CAN Signal Error EMS |
| DTC C1614 | 87: CAN Time-out HCU/VCU/FCU |
| DTC C1616 | 87: CAN bus off |
| DTC C1623 | 85: CAN Time-out Steering Angle Sensor |
| DTC C1623 | 87: CAN Time-out Steering Angle Sensor |
| DTC C1625 | 85: CAN Time-Out ABS/ESP |
| DTC C1625 | 87: CAN Time-Out ABS/ESP |
| DTC C1628 | 87: CAN Time-out Cluster |
| DTC C1642 | 86: CAN Message Failure - Brake |
| DTC C1656 | 86: CAN Signal Error - Cluster |
| DTC C1667 | 87: CAN Timeout of SCC |
| DTC C1672 | 86: SAS Message Counter Error |
| DTC C1687 | 85: CAN Time-out VSM2 (MDPS) |
| DTC C1687 | 87: CAN Time-out VSM2 (MDPS) |
| DTC C1688 | 86: VSM2 (MDPS) Signal Error |
| DTC C1702 | 46: Variant Coding Error |
| DTC C1746 | 86: HDA Coding & Navi Mismatch |
| DTC C1812 | 87: CAN Time-out Gateway |
| DTC C1817 | 86: Invalid signal of CGW |
| DTC C1831 | 86: Invalid signal of NAVI |
| DTC C1862 | 86: Invalid signal of SCC |
| DTC C1863 | 87: CAN Timeout of NAVI for HDA |
| DTC C2239 | 86: LKAS steering control failure |
| DTC C2721 | 46: System Calibration Required |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.