Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Kia Seltos EXFACTORY OEM SERVICE PROCEDURE
Smart Key Code Saving
- Connect the VCI II in driver side crash pad lower panel, turn the power on KDS.
- Select the vehicle model and then do "Smart key code saving".
- After selecting "Smart key teaching" menu, push "Enter" key, then the screen will be shown as below.
- After having the teaching smart key, push "ENTER" key.
- Input the "Pin code" for first key teaching.
- Confirm the message "First key teaching completed".
- Press the SSB with smart key within 5 seconds after pressing "OK".
- Confirm the message "Second key teaching completed".
- Then the screen will be shown as below when key teaching process is completed.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.