2021 Kia Sedona EXFACTORY OEM SERVICE PROCEDURE

Repair Procedures: Installation

  1. Check that the gear is shifted to "N".
  2. Install the position switch (A).
    NOTE: Lightly tighten the inhibitor switch mounting bolts so that necessary adjustments can be made.
    G13044453Courtesy of KIA MOTORS AMERICA, INC.
  3. Install the manual control lever (A) and washer.
    NOTE: Lightly tighten the manual control lever nut so that necessary adjustments can be made.
    G13044454Courtesy of KIA MOTORS AMERICA, INC.
  4. Align the hole in the manual control lever with the "N" position hole of the position switch and then insert the SST inhibitor switch guide pin (09480-A3800).
    G13044455Courtesy of KIA MOTORS AMERICA, INC.
  5. Tighten the manual control lever mounting nut (A).

    Tightening torque: 

    17.7 - 24.5 N.m (1.8 - 2.5 kgf.m, 13.0 - 18.1 lb.ft)

    G13044456Courtesy of KIA MOTORS AMERICA, INC.
  6. Tighten the position switch mounting bolts (A).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G13044457Courtesy of KIA MOTORS AMERICA, INC.
  7. Tighten the nut (A) to the specified torque after removing free play by pushing the shift cable in the direction of the arrow.

    Tightening torque: 

    9.8 - 14.7 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb.ft)

    G13044458Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the SST (09480-A3800) from the adjustment hole.
  9. Connect the position switch connector (A).
    G13044459Courtesy of KIA MOTORS AMERICA, INC.
  10. Install the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.