Motor Driven Power Steering System DTCS

2021 Kia Sedona EXSECTION Motor Driven Power Steering System DTCS
MOTOR DRIVEN POWER STEERING SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC Description
DTC C1101 Battery Voltage High
DTC C1102 Battery Voltage Low
DTC C1109 IGN Signal Error
DTC C1112 Sensor Supply Voltage Error
DTC C1261 Steering Angle Sensor Not Calibrated
DTC C1290 Torque Sensor Signal Error
DTC C1603 MDPS Thermal Protection
DTC C1604 ECU Hardware Error
DTC C1611 CAN Time-out ECM
DTC C1616 CAN Bus Off
DTC C1622 Vehicle Speed Signal Error
DTC C1628 CAN Time-out Cluster
DTC C1692 CAN Time-out VSM
DTC C1693 CAN Signal Error VSM
DTC C1702 Variant Coding Error
DTC C1704 ECU Fail-Safe Relay Fault
DTC C2401 Motor Position Sensor Error
DTC C2412 Motor Short or Open
DTC C2413 Motor Current Error
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.