2021 Kia Niro Plug-In Hybrid EXFACTORY OEM SERVICE PROCEDURE

Integrated Gateway Power Module DTCS

INTEGRATED GATEWAY POWER MODULE DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC Description
DTC B1101 00: Battery Voltage High
DTC B1102 00: Battery Voltage Low
DTC B1602 00: CAN Line Error (B-CAN)
DTC B1603 00: CAN Bus OFF (B-CAN)
DTC B1604 00: CAN Time-Out BCM
DTC B1607 00: CAN Time-Out PSM
DTC B1621 00: ECU-Failure
DTC B1644 00: CAN Time-Out ACU
DTC B164D 00: CAN Time-Out WPC
DTC B168A 00: CAN Time-out SMK
DTC B1699 00: CAN Time-Out AV/AVN
DTC B2211 00: CAN Time-out BMS
DTC B2352 00: Dedicated DRL LH SCG
DTC B2353 00: Dedicated DRL RH SCG
DTC B2517 00: Internal Tail Lamp Circuit Short to Ground
DTC B251A 00: Rear Fog Lamp Short to Ground
DTC B251B 00: Bi-function Head Lamp RH Circuit Short to Ground
DTC B251C 00: Bi-function Head Lamp LH Circuit Short to Ground
DTC B251D 00: Stop Lamp Right Circuit Short to Ground
DTC B251E 00: Stop Lamp Left Circuit Short to Ground
DTC B251F 00: High Mounted Stop Lamp Short to Ground
DTC B2522 00: Turn Signal LH Front Short to Ground
DTC B2523 00: Turn Signal LH Rear Short to Ground
DTC B2524 00: Turn Signal RH Front Short to Ground
DTC B2525 00: Turn Signal RH Rear Short to Ground
DTC B2559 00: Front Fog Lamp Right Circuit Short to Ground
DTC B2563 00: Front Fog Lamp Left Circuit Short to Ground
DTC B258A 00: External Tail Lamp Front Right Short Circuit to Ground
DTC B258B 00: External Tail Lamp Front Left Short Circuit to Ground
DTC B258C 00: External Tail Lamp Rear Right Short Circuit to Ground
DTC B258D 00: External Tail Lamp Rear Left Short Circuit to Ground
DTC B2621 00: CAN Time-Out MLM
DTC B2800 00: CAN Bus Off Error M-CAN
DTC B2801 00: CAN Single Line Error M-CAN
DTC B2803 00: Timeout Multimedia CAN Message (AMP)
DTC B2804 00: CAN Time-Out DATC
DTC C160E 00: CAN Bus Off P-CAN
DTC C1611 00: CAN Time-out EMS
DTC C1612 00: CAN Time-out TCU
DTC C1614 00: CAN time-out HCU/VCU/FCU
DTC C1616 00: CAN Bus OFF C-CAN
DTC C1628 00: CAN Time-out Cluster
DTC C1651 00: CAN Time-out EPB
DTC C166A 00: CAN time-out LDWS/LKAS/MFC/LDW/LKA
DTC C1687 00: CAN Time-Out MDPS
DTC C1806 00: CAN Time-out MCU
DTC C1808 00: CAN Time-out LDC
DTC C1818 00: CAN Time-Out LCA
DTC C1819 00: CAN Time-Out TPMS
DTC C181A 00: CAN Time-Out AAF
DTC C1827 00: CAN Time-Out iBAU
DTC C1829 00: CAN Time-Out OBC
DTC C1830 00: CAN Time-Out VESS
DTC C220B 00: Charge Inlet Actuator Failure
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.