2021 Kia K5 GTFACTORY OEM SERVICE PROCEDURE

Supplemental Restraint System Control Module (SRSCM)

G13835089Courtesy of KIA MOTORS AMERICA, INC.
No Connector A Connector B
1 Driver airbag #1 (High) -
2 Driver airbag #2 (Low) -
3 Passenger airbag #2 (Low) -
4 Passenger airbag #2 (High) Driver rear side airbag (Low)
5 - Driver rear side airbag (High)
6 - Passenger rear side airbag (High)
7 - Passenger rear side airbag (Low)
8 - -
9 - -
10 B+ -
11 Crash output -
12 Passenger airbag #1 (Low) -
13 Passenger airbag #1 (High) -
14 Driver knee airbag (High) -
15 Driver knee airbag (Low) Passenger seat belt buckle sensor (High)
16 Passenger airbag OFF Lamp (Telltale) Driver seat belt buckle sensor (High)
17 - Passenger curtain airbag (Low)
18 - Passenger curtain airbag (High)
19 Driver airbag #1 (High) Driver curtain airbag (High)
20 Driver airbag #1 (Low) Driver curtain airbag (Low)
21 - Passenger side airbag (Low)
22 - Passenger side airbag (High)
23 - Driver side airbag (High)
24 - Driver side airbag (Low)
25 - -
26 C-CAN (Low) -
27 C-CAN (High) Driver seat belt pretensioner (Low)
28 IGN 1 Driver seat belt pretensioner (High)
29 Driver front impact sensor (High) -
30 Driver front impact sensor (Low) -
31 Passenger front impact sensor (Low) -
32 Passenger front impact sensor (High) Passenger seat belt pretensioner (High)
33 - Passenger seat belt pretensioner (Low)
34 - -
35 P-CAN (Low) -
36 P-CAN (High)) -
37   -
38   -
39   -
40   Ground
41   -
42   -
43   Driver pressure side impact sensor (High)
44   Driver pressure side impact sensor (Low)
45   Passenger pressure side impact sensor (Low)
46   Passenger pressure side impact sensor (High)
47   Driver gravity side impact sensor (High)
48   Driver gravity side impact sensor (Low)
49   Passenger gravity side impact sensor (Low)
50   Passenger gravity side impact sensor (High)
51   -
52   -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.