Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2021 Kia Forte EX
Quick Lookups: Fluids
2021 Kia Forte EXSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.00 OZS. | 0.11 L | PAG 46 | Approximate capacity. | S | ||
| Air Cond Refrigerant | 1.15 LBS. | 0.52 KG | R-1234yf | Approximate capacity. | S | ||
| Automatic Transmission Fluid | Automatic CVT Trans | 7.10 QTS. | 6.71 L | KIA Genuine SP-CVT1 | Approximate capacity. | S | |
| Brake Fluid | 0.70 QTS. | 0.66 L | FMVSS116 DOT 3 or DOT 4 Brake Fluid | Approximate capacity. | S | ||
| Engine Coolant | Automatic CVT Trans | 7.00 QTS. | 6.62 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | Approximate capacity. | S | |
| Engine Oil | 2.0L Eng | 4.20 QTS. | 3.97 L | API-Latest (ILSAC Latest) GF-4 or above SAE 5W-20, SAE 5W-30 | For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W-20 (API Service SM / ILSAC GF-4). Approximate capacity. | S | |
| Fuel Tank | 14.00 GALS. | 52.99 L | Approximate capacity. | S | |||
| Manual Transmission Fluid | 1.65 QTS. | 1.56 L | API - GL-4, SAE 70W - HK SYN MTF 70W - SPIRAX S6 GHME 70W MTF - GS MTF HD 70W | Approximate capacity. | S | ||
| Windshield Washer Fluid | N/A | N/A | S | ||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.