2020 Kia Soul LX, Standard TransFACTORY OEM SERVICE PROCEDURE

Repair Procedures: Adjustment

  1. Move the shift lever to 4th gear.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the battery and battery tray.

    (Refer to Body Electrical System - "BATTERY ")

  4. Remove the control cable from the control shaft after removing the snap pins (A).
  5. Remove the select cable (B) and shift cable (C).
    G13283979Courtesy of KIA MOTORS AMERICA, INC.
  6. Install the control cable.
    1. After pulling the holder (A) in the direction of the "P", pull the lock (B) in the direction of the "F".
      G13283980Courtesy of KIA MOTORS AMERICA, INC.
    2. Push the lock (A) after installing the control cable to the control shaft and cable bracket.
      G13283981Courtesy of KIA MOTORS AMERICA, INC.
    3. Insert the snap pins (A).
      G13283982Courtesy of KIA MOTORS AMERICA, INC.
  7. Install the battery and battery tray.

    (Refer to Body Electrical System - "BATTERY ")

  8. Install the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.