Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Kia Sorento LFACTORY OEM SERVICE PROCEDURE
AVN Head Unit
WARNING: This page is about a different car, the 2019 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification | ||
|---|---|---|---|
| Tuning type | PLL SYNTHESIZED TUNNING | ||
| Power supply | DC 14.4V Negative ground | ||
| Load impedance (Ξ©) | 4 Ξ© x 4 | ||
| Antenna | 80pF 75Ξ© | ||
| Dark current (Head unit only) |
With Modem | Key off and after 96 hours: Max 0.5 mA | |
| Key off and before 96 hours: Max 10 mA | |||
| Without Modem | Max 0.5 mA | ||
| Frequency range/Channel space | FM | 87.5 ~ 108.0 MHz/50 kHz or 100 kHz | |
| AM | 522 ~ 1, 620 KHz/9 kHz 531 ~ 1, 602 KHz/9 kHz |
||
| S/N | FM | MIN. 50 dB | |
| AM | MIN. 45 dB | ||
| Others | Display | 8 inch | |
| Amplifier | External | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.