2020 Kia Optima Plug-In Hybrid EXFACTORY OEM SERVICE PROCEDURE

Repair Procedures: Installation

  1. Apply tire soap or lubrication to the top and bottom tire beads.
    G13362465Courtesy of KIA MOTORS AMERICA, INC.
  2. To fit the bottom bead, position the valve at the 5 o'clock position relative to the head on the tire changing machine.
    G13362466Courtesy of KIA MOTORS AMERICA, INC.
  3. Place the tire on the rim so the bottom bead touches the edge of the rim after the valve (6 o'clock). Rotate the rim clockwise, and push down on the tire at the 3 o'clock position to fit bottom bead.
    G13362467Courtesy of KIA MOTORS AMERICA, INC.
  4. After bottom bead is on tire, rotate the rim until the valve is at the 5 o'clock position relative to the head on the tire changing machine. Push down on the tire at the 3 o'clock position and rotate the rim clockwise to fit the top bead.
    G13362468Courtesy of KIA MOTORS AMERICA, INC.
  5. Inflate the tire until both beads seat.

    Tire pressure  : 235 - 242 kPa (34 - 35 psi)

    G13362469Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.