2020 Kia Optima Hybrid EXFACTORY OEM SERVICE PROCEDURE

Special Service Tools

Tool Name/Number Illustration Description
Fuel Pressure Gauge
09353-24100
G13387994Courtesy of KIA MOTORS AMERICA, INC.
Used for measuring the pressure in fuel line
Fuel Pressure Gauge Adapter
0K353-D4100
G13387995Courtesy of KIA MOTORS AMERICA, INC.
Used for connecting between high pressure fuel pump and low pressure fuel feed tube to measure the pressure in fuel line
* SST 09353-02100 also can be used
Heated Oxygen Sensor Socket Wrench
09392-1Y100
G13387996Courtesy of KIA MOTORS AMERICA, INC.
Removal and installation of the heated oxygen sensor
* SST No. 09392-2H100 model also can be used for removing the Heated Oxygen Sensor.
Torque Wrench Socket (19 mm)
09314-3Q100
G13387997Courtesy of KIA MOTORS AMERICA, INC.
Used for removing/installing high pressure fuel pipe
* SST No. 09314-27130 also can be used.
Injector Combustion Seal Guide & Sizing tool
09353-2B000
G13387998Courtesy of KIA MOTORS AMERICA, INC.
Used for installing injector combustion seal on injector
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.