Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Kia K900FACTORY OEM SERVICE PROCEDURE
Terminal Function
| Pin No. | Description | Connected to |
|---|---|---|
| 1 | Battery power (B+) | Fuel Pump Relay |
| 2 | Fuel Pump (U) | Low pressure fuel pump |
| 3 | Fuel Pump (V) | Low pressure fuel pump |
| 4 | Fuel Pump (W) | Low pressure fuel pump |
| 5 | CAN [Low] | Other control module |
| 6 | CAN [High] | Other control module |
| 7 | Ground (-) | Chassis Ground |
| 8 | Fuel Pump shield (Ground) | Chassis Ground |
| 9 | Fuel pressure sensor (FPS) ground (-) | Fuel pressure sensor (FPS) |
| 10 | Fuel pressure sensor (FPS) signal input | Fuel pressure sensor (FPS) |
| 11 | - | - |
| 12 | Fuel pressure sensor (FPS) power supply [+5V] | Fuel pressure sensor (FPS) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.