2019 Kia Niro EXFACTORY OEM SERVICE PROCEDURE

Navigation (GPS/SD Card)

WARNING: This page is about a different variant/trim than selected.
  1. System features/Misdiagnose cases
    Inspection Description
    (1) System features Β 
    1. Displays map using GPS/DR system, calculating GPS signal and vehicle speed
      1. Possible reception issue in poor reception area
      2. Additional wait time required after battery re-connection
    (2) Misdiagnose cases Β 
    1. Black Box related: GPS reception issue from black box noise
    2. Cluster speed and navigation speed: It may vary (Design spec)
    3. Set Navigation display "North" will lock display of direction
    4. No SXM reception due to environmental issue: Buildings, Tower turn-table parking lot
  2. No GPS Reception/Inaccurate current location
    Issue Inspection Description
    Reception/Inaccurate current location (1) Duplicate issue
    • Duplicate using AVN
    • GPS reception on Engineering Mode
    G00584791G00584792G00584793G00584794G00584795G00584796Courtesy of KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.
    1. Duplicate issue
      1. Compass icon is activated (Normal: Red compass color)
      2. Correct current location
      Fig 1: Display Of GPS Location
      G00584792Courtesy of KIA MOTORS AMERICA, INC.
    2. GPS activated

      (Normal: 3 or more yellow "Receive" icon)

      Fig 2: Display Of GPS Activated
      G00584793Courtesy of KIA MOTORS AMERICA, INC.
    3. 3-1. Enter Engineering Mode

      1. Menu > Settings > System Info > Storage or SW Info > Touch left bottom 5 times, right bottom 1 time
      Fig 3: Information At Engineering Mode
      G00584794Courtesy of KIA MOTORS AMERICA, INC.

      3-2. DR information at Engineering mode

      (Normal: 3 or more STATUS 1, SNR 40 or above)

      Fig 4: Antenna Connection At Engineering Mode
      G00584795Courtesy of KIA MOTORS AMERICA, INC.
    4. Antenna connection at Engineering mode
      1. Engineering mode β†’ Care β†’ Vehicle I/F diagnose β†’ GPS ANT SHORT/OPEN

        (Normal: NOT SHORT, NOT OPEN)

      Fig 5: Checking Cable Connection
      G00584796Courtesy of KIA MOTORS AMERICA, INC.
    5. If connection is "Open", check cable connection
      1. AVN connector
      2. Antenna connection
      3. Cable connection

    β†’ Move to good reception area and re-test (Poor reception area)
    β†’ Proceed with below step if this issue continues
  3. GPS reception/Incorrect current location
    Issue Inspection Description
    No GPS reception/Inaccurate current location (1) Duplicate issue
    • Duplicate using AVN
    • GPS reception on Engineering Mode
    G00584791G00584792G00584793G00584794Courtesy of KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.
    1. Duplicate issue
      1. Compass icon is activated (Normal: Red compass color)
      2. Check if map displays current location
      Fig 6: Display Of GPS Location
      G00584792Courtesy of KIA MOTORS AMERICA, INC.
    2. GPS activated

      (Normal: 3 or more yellow "Receive" icon)

      Fig 7: Display Of GPS Activated
      G00584793Courtesy of KIA MOTORS AMERICA, INC.
    3. Check DR at Engineering mode
      1. Engineering mode > Module info > Navi engineering mode

        (Normal: 3 or more STATUS 1, SNR 40 or above)

      Fig 8: Information At Engineering Mode
      G00584794Courtesy of KIA MOTORS AMERICA, INC.

    β†’ Move to good reception area and re-test (Poor reception area)
    β†’ Proceed with below step if issue continues
    No GPS reception/Inaccurate current location (2) External/Environmental issue
    • Black box
    • Cable connection
    G00584797G00584793G00584795Courtesy of KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.KIA MOTORS AMERICA, INC.
    1. Black box related issue
      1. Remove power on black box and reconnect

        (Many cases with GPS reception issue due to black box power)

      Fig 9: Display Of GPS Activated
      G00584793Courtesy of KIA MOTORS AMERICA, INC.
      Factory Service Tools

      Use the Manual With the Right Hardware

      Pair factory procedures with proven DIY tools so the instructions are easier to execute.

      Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

      When to See a Mechanic

      Stop DIY work and contact a certified mechanic immediately if any of the following apply:

      • β€’ You smell fuel, burning insulation, or see smoke.
      • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
      • β€’ The engine overheats, stalls repeatedly, or misfires under load.
      • β€’ You are missing required tools, torque specs, or safe lifting equipment.
      • β€’ You are not confident in the next step or safety outcome.