Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Kia K900FACTORY OEM SERVICE PROCEDURE
Fuel sender
[Main Fuel Sender]
| Position | Resistance (Ω) | Capacity (l ) |
|---|---|---|
| E | 137.5 - 140.5 | 3.0 |
| 1/2 | 6.0 - 8.0 | 38.0 |
| F | 6.0 - 8.0 | 75.0 |
[Sub Fuel Sender]
| Position | Resistance (Ω) | Capacity (l ) |
|---|---|---|
| E | 137.5 - 140.5 | 3.0 |
| 1/2 | 6.0 - 8.0 | 38.0 |
| F | 6.0 - 8.0 | 75.0 |
[Main Fuel Sender + Sub Fuel Sender Composite resistance]
| Position | Resistance (Ω) | Capacity (l ) |
|---|---|---|
| E | 297 - 303 | 3.0 |
| 1/2 | 167 - 169 | 38.0 |
| F | 13 - 17 | 75.0 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
