Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Kia Forte SFACTORY OEM SERVICE PROCEDURE
Service Data: Notes
AUTOMATIC TRANSAXLE SYSTEM SPECIFICATIONS
| Item | Specification | |
|---|---|---|
| Transmission type | C0GF1 | |
| Engine type | Nu 2.0 MPI (Atkinson) | |
| Clutch type | Torque converter | |
| Torque converter size | Γ 210 mm | |
| Oil pump type | Chain drive vane pump | |
| Planetary gear | Double pinion planetary gear | |
| Gear ratio | S1 | 2.550 |
| S2 | 1.804 | |
| S3 | 1.262 | |
| S4 | 0.918 | |
| S5 | 0.696 | |
| S6 | 0.548 | |
| S7 | 0.449 | |
| S8 | 0.385 | |
| Reverse | 1.053 | |
| Final gear ratio | 4.892 | |
| Component elements | Oil pump | 1 unit |
| Oil filter | Main filter: 1 unit | |
| pressure filter: 1 unit | ||
| Clutch | 1 unit | |
| Brake | 1 unit | |
| Planetary gear | 1 unit | |
| Drive pulley | 1 unit | |
| Driven Pulley | 1 unit | |
| Chain belt | 1 unit | |
| Solenoid valve | Direct Control VFS: 2 units | |
| Indirect Control VFS: 4 units | ||
* IVT: Intelligent Variable Transmission
* IVTF: Intelligent Variable Transmission Fluid
* VFS: Variable Force Solenoid
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
