2019 Kia Forte SFACTORY OEM SERVICE PROCEDURE

Smart Key Code Saving

  1. Connect the VCI II of KDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on KDS.
  2. Select the vehicle model and then do "Smart key code saving".
    G12832761Courtesy of KIA MOTORS AMERICA, INC.
    G12832762Courtesy of KIA MOTORS AMERICA, INC.
  3. After selecting "Smart key teaching" menu, push "Enter" key, then the screen will be shown as below.
    G12832763Courtesy of KIA MOTORS AMERICA, INC.
  4. After having the teaching smart key, push "ENTER" key.
  5. Input the "Pin code" for first key teaching.
    G12832764Courtesy of KIA MOTORS AMERICA, INC.
    G12832765Courtesy of KIA MOTORS AMERICA, INC.
    G12832766Courtesy of KIA MOTORS AMERICA, INC.
  6. Confirm the message "First key teaching completed".
    G12832767Courtesy of KIA MOTORS AMERICA, INC.
  7. Press the SSB with smart key within 5 sec after pressing "OK".
    G12832768Courtesy of KIA MOTORS AMERICA, INC.
  8. Confirm the message "Second key teaching completed".
    G12832769Courtesy of KIA MOTORS AMERICA, INC.
    G12832770Courtesy of KIA MOTORS AMERICA, INC.
  9. Then the screen will be shown as below when key teaching process is completed.
    G12832771Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.