Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Kia Forte EXFACTORY OEM SERVICE PROCEDURE
DTC Index
DTC INDEX
| DTC | Description |
|---|---|
| DTC P000A | 00: 'A' Camshaft Position Slow Response Bank 1 |
| DTC P000B | 00: 'B' Camshaft Position Slow Response Bank 1 |
| DTC P0011 | 00: 'A (Intake)' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1) |
| DTC P0014 | 00: 'B (Exhaust)' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1) |
| DTC P0016 | 00: Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A (Intake)) |
| DTC P0017 | 00: Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B (Exhaust)) |
| DTC P0030 | 00: HO2S Heater Control Circuit (Bank 1/Sensor 1) |
| DTC P0031 | 00: HO2S Heater Control Circuit Low (Bank 1/Sensor 1) |
| DTC P0032 | 00: HO2S Heater Control Circuit High (Bank 1/Sensor 1) |
| DTC P0036 | 00: HO2S Heater Control Circuit (Bank 1/Sensor 2) |
| DTC P0037 | 00: HO2S Heater Control Circuit Low (Bank 1/Sensor 2) |
| DTC P0038 | 00: HO2S Heater Control Circuit High (Bank 1/Sensor 2) |
| DTC P0068 | 00: MAP (MAF)-Throttle Position Sensor Correlation |
| DTC P0075 | 00: Intake Valve Control Solenoid Circuit (Bank 1) |
| DTC P0076 | 00: Intake Valve Control Solenoid Circuit-Low (Bank 1) |
| DTC P0077 | 00: Intake Valve Control Solenoid Circuit-High (Bank 1) |
| DTC P0078 | 00: Exhaust Valve Control Solenoid Circuit (Bank 1) |
| DTC P0079 | 00: Exhaust Valve Control Solenoid Circuit Low (Bank 1) |
| DTC P0080 | 00: Exhaust Valve Control Solenoid Circuit High (Bank 1) |
| DTC P00D1 | 00: HO2S Heater Control Circuit Range/Performance Bank 1 Sensor 1 |
| DTC P00D2 | 00: HO2S Heater Control Circuit Range/Performance Bank 1 Sensor 2 |
| DTC P0101 | 00: Mass or Volume Air Flow 'A' Circuit Range/Performance |
| DTC P0102 | 00: Mass or Volume Air Flow 'A' Circuit Low Input |
| DTC P0103 | 00: Mass or Volume Air Flow 'A' Circuit High Input |
| DTC P0106 | 00: Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance |
| DTC P0107 | 00: Manifold Absolute Pressure/Barometric Pressure Circuit Low Input |
| DTC P0108 | 00: Manifold Absolute Pressure/Barometric Pressure Circuit High Input |
| DTC P0111 | 00: Intake Air Temperature Sensor 1 Circuit Range/Performance |
| DTC P0112 | 00: Intake Air Temperature Sensor 1 Circuit Low Input |
| DTC P0113 | 00: Intake Air Temperature Sensor 1 Circuit High Input |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.