2019 Kia Cadenza TechnologyFACTORY OEM SERVICE PROCEDURE

Applied For EPB

Fig 1: Electronic Stability Program System (EPB Applied)
G12294510Courtesy of KIA MOTORS AMERICA, INC.
Pin No Description Current (amps) Resistance (mΩ) Remark
1 POS. BATTERY 2.(MOTOR) 137 (RUSH) 10 -
2 RR EPB MOTOR (-) 20 10 -
3 RR EPB MOTOR (+) 20 10 -
4 Clutch stroke sensor 1 2 mA 250 -
5 EPB SWITCH 2 (Operation) 30 mA 250 -
6 EPB SWITCH 1 (Operation) 30 mA 250 -
7 Clutch stroke sensor 2 2 mA 250 -
8 EPB SWITCH 3 (Release) 30 mA 250 -
9 EPB SWITCH 4 (Release) 30 mA 250 -
10 AVH SWITCH - 250 -
11 ESP OFF SWITCH 10 mA 250 -
12 RL EPB MOTOR (-) 2 mA 250 -
13 RL EPB MOTOR (+) 2 mA 250 -
14 PUMP MOTOR GROUND 137 (RUSH) 10 mΩ -
15 C-CAN High 30 mA 250 -
16 C-CAN Low 30 mA 250 -
17 IGN1 (+) 50 mA 60 -
20 Clutch stroke sensor power 50 mA 250 -
25 BRAKE LIGHT SWITCH 10 mA 250 -
26 SENSOR REAR LEFT POWER 30 mA 250 -
27 SENSOR REAR LEFT SIGNAL 16.8 mA 250 -
28 SENSOR FRONT LEFT POWER 30 mA 250 -
29 SENSOR FRONT LEFT SIGNAL 16.8 mA 250 -
30 POS. BATTERY 1.(SOLENOID) 40 10 mΩ -
31 Clutch stroke sensor ground 16.8 mA 250 -
33 L-CAN High 30 mA 250 -
34 L-CAN Low 30 mA 250 -
36 GEAR SWITCH 10 mA 250 -
37 DBC SWITCH 10 mA 250 -
41 SENSOR FRONT RIGHT OUTPUT 16 mA 250 -
42 SENSOR REAR RIGHT POWER 30 mA 250 -
43 SENSOR REAR RIGHT SIGNAL 16.8 mA 250 -
44 SENSOR FRONT RIGHT POWER 30 mA 250 -
45 SENSOR FRONT RIGHT SIGNAL 16.8 mA 250 -
46 GROUND 40 10 mΩ -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.