2018 Kia Soul Base, Standard TransFACTORY OEM SERVICE PROCEDURE

Smart Key Unit

  1. Disconnect the negative (-) battery terminal.
  2. Remove the main crash pad assembly.

    (Refer to Body - "MAIN CRASH PAD ASSEMBLY ")

  3. Loosen the mounting bolts and nut from the smart key unit bracket.
    Fig 1: Loosening Mounting Bolts And Nut From Smart Key Unit Bracket
    G12237963Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the smart key unit (B) after disconnecting the connector (A) from the smart key unit.
    Fig 2: Removing Smart Key Unit Connector From Smart Key Unit
    G12237964Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.