Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Kia Soul Base, Automatic TransFACTORY OEM SERVICE PROCEDURE
AVN Head Unit
| Item | Specification | |
|---|---|---|
| Power supply | DC 14.4V Negative ground | |
| Dark current | Max. 0.5mA (Head unit only) (When ACC off, ADM off) | |
| Frequency range/Channel space | FM | 87.5 - 107.9 MHz/200 kHz |
| AM | 530 - 1, 710 kHz/10 kHz | |
| S/N | FM | MIN 50 dB |
| AM | MIN 45 dB | |
| Display | Active area | 176.4mm(H) x 99.36mm(V) |
| Resolution | 800 x RGB x 480 | |
| GPS receiver | Frequency | 1.57542 Ghz |
* ADM (Accessory Delay Mode): AVN monitor is or even after IGN OFF for about 3 minutes.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.