Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2017 Kia Soul +FACTORY OEM SERVICE PROCEDURE

Repair Procedures: Installation

Check that the shift lever is placed in the "N" position.
Install the shift cable retainer (A).
Tightening torque:

11.8 - 14.7 N.m (1.2 - 1.5 kgf.m, 8.7 - 10.8 lb.ft)

Fig 1: Locating Shift Cable Retainer With Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Install the shift cable (A).

Fig 2: Installing Shift Cable
Courtesy of KIA MOTORS AMERICA, INC.
Install the floor console assembly.
(Refer to Body "FLOOR CONSOLE ")
Install the knob (A) by pressing it in the direction of arrow after installing the boots to the console upper cover.

Fig 3: Installing Knob
Courtesy of KIA MOTORS AMERICA, INC.
Install the shift cable (A) to bracket and then lightly tighten the nut (B).

Fig 4: Locating Shift Cable And Nut
Courtesy of KIA MOTORS AMERICA, INC.

Chapter Navigation

Return to Chapter: Repair Procedures

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.