2017 Kia Rio SXFACTORY OEM SERVICE PROCEDURE

Checking List Of Shift Lock

  1. Brake pedal being not depressed.

    AT lever (shift lever) must not be shifted from "P" position to "R" position.

  2. Brake pedal being not depressed.

    AT lever (shift lever) must not be shifted from "N" position to "R" position.

  3. Brake pedal being depressed by stroke 15-26 mm in "P" position.

    Push button can be operated and AT lever (shift lever) can be shifted smoothly from each position to other positions.

  4. Brake pedal must be operated smoothly without interruption at all positions.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.