Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2017RIO EX, 4D HATCHBACKREPAIR AND DIAGNOSISTRANSMISSIONTRANSMISSION CONTROL SYSTEMSAUTOMATIC TRANSAXLE CONTROL SYSTEMINPUT SPEED SENSORREPAIR PROCEDURESREMOVAL
2017 Kia Rio EX, 4D Hatchback
Repair Procedures: Removal
2017 Kia Rio EX, 4D HatchbackSECTION Removal
- Remove the battery and the battery tray.
(Refer to "CHARGING SYSTEM ".)
- Remove the under cover (A).
Tightening Torque:
6.9-10.8 N.m (0.7-1.1 kgf.m, 5.1-8.0 lb-ft)
- Replace new gasket and the plug after draining the automatic transaxle fluid by removing the drain plug. (Refer to "HYDRAULIC SYSTEM (FLUID) ")
- Remove the air breather hose (A).
- Remove the valve body cover (B).
Tightening Torque:
13.7-15.7 N.m (1.4-1.6 kgf.m, 10.8-11.6 lb-ft)
NOTE: Remove installation bolts in the engine compartment first and then remove others under the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.