General Information: DTC Detecting Condition

2017 Kia Rio EX, 4D HatchbackSECTION DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy
  • Reference mark check (During cranking)
  1. Poor connection
  2. Open or short in signal circuit
  3. CKPS
Enable Conditions
  • -
Threshold Value Case1
  • No signal input detected
Case2
  • Gap position missed
Case3
  • Gap position not found
Case4
  • Teeth no. between consecutive gaps is not correct
Diagnostic Time
  • Continuous
MIL ON Condition
  • 2 driving cycle
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.