2017 Kia Optima Plug-In Hybrid EXFACTORY OEM SERVICE PROCEDURE

Automatic Transaxle

AUTOMATIC TRANSAXLE SPECIFICATIONS

Item Specification
Transaxle model A6MF2H
Engine model Gasoline 2.0
Torsion damper DMF Type
Torsion damper size Ø 281.4 mm (11.0787 in.)
Oil pump type Electric Oil Pump (EOP)
*ATF Capacity 6.0L (1.59 U.S gal., 6.34 U.S.qt., 5.28 Imp.qt.)
Recommended
  • ATF SP-IV
*Recommended transaxle fluid: SK ATF SP-IV, MICHANG ATF SP-IV, NOCA ATF SP-IV
Gear ratio 1st 4.639
2nd 2.826
3rd 1.841
4th 1.386
5th 1.000
6th 0.772
Reverse 3.385
Final gear ratio 3.32
Component elements Oil filter 1 unit
Clutch 2 units
One-way clutch 1 unit
Brake 3 units
Planetary gear 3 units
Fluid pressure balance piston 2 units
Accumulator 4 units
Solenoid valve 8 units (*VFS: 6, ON/OFF: 2)

*ATF: Automatic Transaxle Fluid

*VFS: Variable Force Solenoid

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.