2017 Kia Optima Plug-In Hybrid EXFACTORY OEM SERVICE PROCEDURE

Repair Procedures: Remove

  1. Remove the wheel & tire (A).

    Tightening Torque:Β 

    88.3 - 107.9 N.m (9.0 - 11.0 kgf.m, 65.1 - 79.6 lb.ft)

    G12350278Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Be careful not to damage to the hub bolts when removing the front wheel and tire (A).
  2. Remove the front wheel speed sensor mounting bolt (A).

    Tightening Torque:Β 

    8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)

    G12350279Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the front wheel house cover.
  4. Remove the mounting bolts (A).
    G12350280Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the front wheel speed sensor connector (A), then remove the front wheel speed sensor.
G12350281Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.