2017 Kia Forte EXFACTORY OEM SERVICE PROCEDURE

FORTE (YD) All Models

FORTE (YD) All Models

Measurement Minimum Preferred Maximum
Left Front Caster (°) 3.63 4.13 4.63
Right Front Caster (°) 3.63 4.13 4.63
Left Front Camber (°) -1 -0.5 0
Right Front Camber (°) -1 -0.5 0
Front Toe (°) -0.1 0.1 0.3
Left SAI (°) 13.4 13.9 14.4
Right SAI (°) 13.4 13.9 14.4
Left Rear Camber (°) -2 -1.5 -1
Right Rear Camber (°) -2 -1.5 -1
Rear Toe (°) 0 0.4 0.9
Thrust Angle (°) 0 0 0
Left Toe Out, Inward (°) 0 0 0
Right Toe Out, Inward (°) 0 0 0
Left Toe Out, Outward (°) 0 0 0
Right Toe Out, Outward (°) 0 0 0
Left Max Turn, Inward (°) 0 0 0
Right Max Turn, Inward (°) 0 0 0
Left Max Turn, Outward (°) 0 0 0
Right Max Turn, Outward (°) 0 0 0
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.